Instructions for use _ homba baby

INSTRUCTIONS FOR USE _ homba baby (SK)

The Homba Baby Hanging Cradle will quickly soothe your baby and give him quality sleep during the day as well. The spring has a load capacity of <15 kg and ensures rhythmic rocking (up - down). Rocking similar to what the baby experienced in the mother's belly during pregnancy. Rocking a baby induces pleasant feelings.

The baby in the cradle lies in the so-called "ball". The back is slightly bent into a round shape and the legs are bent towards the body. This is how most physiotherapists recommend carrying a baby. In this way, the correct development of the spine is supported, and colic is also alleviated. Slightly raising the cradle near the baby's head prevents reflux, which can occur especially in the first 6 months. Thanks to the cradle, the baby actively relaxes, falls asleep easily, and you can spend less time putting them to sleep and have more time to relax, yourself, and the rest of the family.

PURPOSE OF USE

The textile hanging cradle Homba baby is used for rocking, lulling, lying down and sleeping babies from 0 to approx. 10 months (does not replace a cot). The maximum load capacity of the spring is <15kg.

Ways and conditions of using the cradle other than those specified in the manual are prohibited!

SAFETY ALERT

  • Carefully read the instructions for use and use the product according to the instructions - any modifications and changes to the product that have a negative impact on safety and health protection are prohibited. Do not hang the cradle near fire or other heat sources.
  • Before the 1st use, wash the cradle according to the instructions.
  • Do not leave the child unattended - from the moment when the child is able to sit or turn around in the cradle, the cradle can only be used in the immediate presence of an adult. The manufacturer is not responsible for any accidents. The cradle is not intended for playing.
  • Do not exceed the permitted load capacity of <15 kg - there is a risk of deformation of the spring or its breakage.
  • Check the safety rope regularly - IT MUST PASS THROUGH THE UPPER LINK, THE SPRING AND THE LOWER carabiner. ADJUST ITS LENGTH SO THAT WHEN THE CRADLE SPRING IS DESTROYED, IT REMAINS HANGING ABOVE THE GROUND, and at the same time you can swing comfortably.
  • Check the condition of the used rope regularly - it must be in perfect condition, there must be no mechanical wear. If you find even minimal damage, replace the rope immediately!
  • Regularly check the strength of the suspension method - screw in the ceiling, inter-door crossbar, separate stand. Place the cradle only in places that can safely support the resulting load. Beware of plasterboard ceilings or other coverings. In this case, always consult an expert about the suspension. Check the strength of the screws and brackets with a load test using your own weight.
  • Packaging – plastic bags and other packaging must be out of the reach of children under 3 years old after unpacking the product.

PACKAGE CONTENTS

  1. Textile hanging cradle
  2. Foam mattress
  3. Mattress cover
  4. Wooden oak spacer
  5. Spring
  6. Spring cover
  7. Carbine
  8. Connecting link
  9. Safety rope - 2m
  10. Rope for hanging - 2m
  11. Textile bag with zipper

ASSEMBLY OF THE CRADLE

  • Spring assembly and attachment
  • Take the spring and check if

    the safety rope passes through the connector

    link - through the spring - through the carabiner.

    The safety rope is tied with a figure-of-eight reverse knot.

    The length of the rope must allow comfortable swinging and at the same time

    must not drop the cradle on the ground in case

    destruction of the spring. Finally, check

    knot strength (reverse figure eight knot).

    Insert the connecting link (clip) into

    prepared suspension method

    (on the ceiling, in the stand) and screw it, or use a rope for suspension - 2 m, which you tie to the required length with a figure-of-eight reverse knot.

    1. Inserting the cradle

    Take the textile cradle

    and in the place of the upper translation, gradually gather the fabric

    so that you can insert it

    into the carbine. Then close the carabiner.

    Place the baby in a textile bag

    from the side on which there are rivets for unfastening on the cradle.

    Unzip them for purposes

    inserting the baby.

  • Inserting the mattress into the cradle
  • Insert the mattress into the suspended cradle (buckwheat pods up) up to the upper (back) edge of the Homba baby textile cradle.

  • Installation of a wooden spacer
  • Fold the sides of the Homba baby textile cradle and insert it into the grooves of the wooden spacer (bar) approximately 10 cm from the upper insertion into the carabiner.

  • Putting the baby in the cradle
  • Place the baby so that its head is at the top edge. This will ensure that the head will be slightly elevated. After placing the baby, fasten the rivets on the front of the cradle. When the baby is inside the bag, the rivets must always be on.

    Figure eight reverse knot

    The spring must always be secured with a safety rope, which is tied through the spring, clip, carabiner and tied with a reverse figure-of-eight knot. The rope must always be checked to see if it is in good order and sure of the spring. If the rope shows signs of damage, it must be replaced immediately.

    1. ROPE FOR SUSPENSION
    2. CONNECTING LINK (SCREW CARABINER)
    3. SPRING (LOAD CAPACITY up to 15kg)
    4. CARABINE
    5. SAFETY ROPE 2M (IMPORTANT)
    6. TEXTILE CRADLE
    7. WOODEN SPACER
    8. MATTRESS PACK
    9. MATTRESS

    MAINTENANCE

    You can wash the textile bag at 40°C. The mattress cannot be washed because of the inserted buckwheat pods. However, you can clean it with a damp cloth in the place of pollution. Therefore, it is necessary to protect it with a cover, which is part of the package. Product life is at least 2 years.

    LIQUIDATION

    Disposal of the product after its irreparable damage or after the end of its useful life - the device must be disassembled and separated into individual parts, parts and materials, which will be disposed of according to the applicable legislation and regulations at the time of their disposal.

    INSTRUCTIONS FOR USE (CZ)

    The Homba baby cradle will quickly soothe your baby and give him quality sleep during the day. The spring has a load capacity of <15 kg and ensures the rhythmic rocking (up - down) that the baby experienced in the mother's belly during the entire pregnancy. Rocking a baby induces pleasant feelings.

    The baby in the cradle lies in the so-called little ball. The back is slightly rounded and the legs are bent towards the body. This is how most physiotherapists recommend carrying a baby. This supports the proper development of the spine and also alleviates colic. A slight elevation of the cradle at the baby's head prevents reflux, which can manifest itself especially in the first 6 months. Thanks to the cradle, the baby actively relaxes and falls asleep easily. Mom, that way she spends less time falling asleep and has more time to relax, for herself and the rest of the family.

    PURPOSE OF USE

    The Homba baby textile cradle is used for rocking, lulling, lying down and sleeping babies from 0 to about 10 months (does not replace a cot). The maximum load capacity of the spring is <15kg.

    Methods and conditions of using the cradle other than those specified in the manual are prohibited!

    SAFETY ALERT

    • Carefully read the instructions for use and use the product according to the instructions - any modifications and changes to the product that have a negative effect on safety and health protection are prohibited. Do not hang the cradle near a fire or other heat sources. • Do not leave the child unattended - from the moment the child is able to sit or turn in the cradle by himself, the cradle can only be used in the immediate presence of an adult. The manufacturer is not responsible for any accidents. The cradle is not intended for playing.
    • Before the first use, wash the cradle according to the instructions.
    • Do not exceed the permitted load capacity of <15 kg - there is a risk of deformation of the spring or its breakage.
    • Check the safety rope regularly - IT MUST PASS THROUGH THE UPPER CONNECTING LINK, THE SPRING AND THE LOWER CARABINER. ADJUST ITS LENGTH SO THAT IN THE CASE OF DESTRUCTION OF THE SPRING, THE CRADLE REMAINS HANGING ABOVE THE GROUND and at the same time you could rock comfortably.
    • Check the condition of the used rope regularly - it must be in perfect condition, there must be no mechanical wear. If you find even minimal damage, replace the rope immediately!
    • Regularly check the strength of the suspension method - screw in the ceiling, inter-door crossbar, separate stand. Place the cradle only in places that can safely hold the resulting load. Beware of plasterboard ceilings or other coverings. In this case of suspension, always consult an expert. Check the strength of the screws and holders with a load test using your own weight.
    • Packaging – plastic bags and other packaging must be out of the reach of children under 3 years old after unpacking the product.

    PACKAGE CONTENTS

    1. Textile hanging cradle
    2. Foam mattress
    3. Mattress cover
    4. Wooden oak spacer
    5. Spring
    6. Spring cover
    7. Carbine
    8. Connecting link
    9. Safety rope - 2m
    10. Rope for hanging - 2m
    11. Textile bag with zip

    ASSEMBLY OF THE CRADLE

    1. Assembling the spring and attachment

    Take the spring and check that

    the safety cable passes through the connector

    link - via spring - via carabiner.

    The safety rope is tied with a figure of eight

    the opposite node. The length of the cable must

    allow comfortable swinging and at the same time

    he must not drop the cradle on the ground. In case

    spring destruction. Finally, check

    knot strength (reverse figure eight knot).

    Insert the connecting link (clip) into

    prepared suspension method

    (on the ceiling, in the stand)

    and screw it in.

    1. Inserting the cradle

    Take a textile bag

    and in the place of the upper fold, gradually increase the fabric

    so that you can insert it into the carabiner. Gathered fabric

    insert into the carabiner and close the carabiner. You will put the baby in the textile bag from the side where there are rivets on the bag, which for the purpose

    unzip the insert.

    1. Inserting the mattress into the cradle

    Place the mattress in the bag

    (buckwheat pods

    up) to the top

    (back) edge of the textile

    bag Homba baby.

    1. Insertion of wooden spacers.

    The sides of the textile bag

    Homba baby grow a

    insert into the grooves

    wooden spacers

    (bars) approximately 10 cm from the upper one

    insertion in the carabiner.

    1. Putting the baby in the cradle.

    Place the baby so that it has

    header at the top edge.

    This ensures that the header will be

    slightly elevated. After inserting the baby

    fasten the rivets on the front of the bag.

    When the baby is inside the bag,

    rivets must always be on.



    Figure-of-eight reverse knot 

    The spring must always be secure

    safety rope, which

    it is tied via a spring, a clip, a carabiner and tied with a reverse figure-of-eight knot. As soon as the rope shows signs of damage, it needs to be replaced immediately, and always

    check that the rope is in order and secures the spring

    1. CONNECTING LINK (STAPLE)

    2. SPRING (LOAD CAPACITY 15kg)

    3. CARABINE

    4. SAFETY ROPE (IMPORTANT)

    5. WOODEN SPACER

    6. SWING CABLE

    7. TEXTILE BAG

    8. MATTRESSES

    9. MATTRESS PACK

    10. BAG

    MAINTENANCE

    The textile bag can be washed at 40 °C. The mattress cannot be washed because of embedded buckwheat pods, you can only clean it with a damp cloth in the place of contamination. Therefore, it is necessary to protect it with a cover, which is part of the package. Product life is at least 2 years.

    LIQUIDATION

    Disposal of the product after its irreparable damage or after the end of its useful life - the device must be disassembled and separated into individual parts, parts and materials, which will be disposed of according to the applicable legislation and regulations at the time of their disposal.

    Manufacturer: MAD Solutions sro, www.homba.store 

    INSTRUCTIONS FOR USE

    Homba baby cradle will quickly calm your baby and give him/her a good night's sleep even during the day. The spring has a load capacity of <15 kg and ensures rhythmic swings (up – down), which the baby experiences in the mother's abdomen during the entire pregnancy. Swinging gives the baby a pleasant feeling.

    The baby in the cradle lies in the position of the so-called "ball". The back is slightly bent into a round shape and the legs are bent towards the body. This is how most physiotherapists recommend carrying a baby. This supports the proper development of the spine and also reduces the effects of the baby's colic. A slight lifting of the cradle at the baby's head prevents reflux, which can manifest itself especially in the first 6 months. Thanks to the cradle, the baby actively relaxes and falls asleep easily. The mother spends less time putting the baby to sleep and has more time to relax, more time for herself and the rest of the family.

    PURPOSE OF USE

    Homba baby textile cradle is used for rocking the baby, putting the baby to sleep, for the baby to lie and sleep from 0 to about 10 months (it does not replace a baby crib). The maximum load capacity of the spring is <15kg.

    Methods and conditions of use of the cradle other than those specified in the instructions are prohibited!

    SAFETY WARNING

    • Read the instructions for use carefully and use the product according to the instructions given - any modifications and changes to the product that have a negative effect on safety and health protection are prohibited. Do not hang the cradle near fire or other heat sources.
    • Before using the cradle for the first time, wash it according to the instructions
    • Do not leave a child unattended - from the moment the child is able to sit or turn on his / her own in the cradle, the cradle can only be used in the immediate presence of an adult. The manufacturer is not liable for any accidents. The cradle is not intended for play.
    • Do not exceed the permissible load <15 kg - there is a risk of spring deformation or its rupture.
    • Check the safety rope regularly - IT MUST GO THROUGH THE UPPER CONNECTOR, SPRING, AND LOWER CARABINE. ADJUST ITS LENGTH SO THAT IN THE EVENT OF DESTRUCTION OF THE SPRING THE CRADLE REMAINS TO HANG ABOVE THE GROUND and at the same time you can swing comfortably.
    • Regularly check the condition of the rope used - it must be in perfect condition, there must be no mechanical wear. If even minimal damage is found, replace the rope immediately!
    • Regularly check the strength of the hanging method – the screw in the ceiling, the intermediate door rail, and a separate stand. Place the cradle only in places that can safely support the load. Beware of plasterboard ceilings or other tiles. In this case, always consult a specialist for suspension. Check the strength of the screws and holders with a stress test using your own weight.
    • Packaging - plastic wrappers and other packaging must be out of the reach of children under 3 years of age after unpacking the product.

    PACKAGE CONTENT

    1. Textile swing bag
    2. Foam mattress
    3. Mattress sheet
    4. Wooden oak strut
    5. Spring
    6. Spring wrapper
    7. Carbine
    8. Connecting link
    9. Safety rope – 2 m
    10. Rope for hanging – 2 m
    11. Textile bag with zipper

    ASSEMBLING OF THE CRADLE

  • Spring assembly and mounting
  • Take the spring and check that

    the safety rope passes through the connecting

    link - via spring - via carbine.

    The safety rope is tied with an octagonal opposing knot. The length of the rope must

    allow comfortable swinging and at the same time

    must not drop the cradle in case of

    spring destruction. Finally, check

    knot strength (octagonal opposing knot). Insert the connecting link into

    prepared method of hanging

    (on the ceiling, in a stand)

    and screw it on, or use rope for hanging 2m with an octagonal opposing knot..

  • Cradle insertion
  • Take the textile bag and in the place of the upper

    conversion into the fabric gradually drape the fabric

    so that you can insert it to the carabiner. Then close the carabiner. Put the baby in a textile bag from the side on which the rivets are on the bag. Unbutton them for the purpose of the

    insertion.

  • Inserting the mattress into the cradle
  • Put the mattress in the bag (buckwheat pods

    1. up) up to the top (rear) edge of the textile Homba baby hammock.

  • Inserting a wooden spacer
  • Drap the sides of the textile hammock Homba baby and 

    insert into the crimp grooves of the wooden spacer (bar)

    approximately 10 cm from the top insertion into the carbine.

  • Putting the baby in the cradle
  • Insert the baby so that it has its head at the top edge.

    This will ensure that the head will be

    slightly elevated. After inserting the baby

    button the rivets on the front of the bag.

    When the baby is inside the bag,

    the rivets must always be buttoned.

    Octagonal opposing wick

    The spring must always be secured by the safety rope, which is tied over a spring by a clamp, carabiner and tied in an octagonal opposing knot.

    As soon as the rope shows signs of damage it needs to be replaced immediately, and it always needs to be checked if the rope is OK and secures the spring.

    1. CONNECTING LINK (CLAMP)
    2. SPRING (LOAD CAPACITY MAX. 15kg)
    3. CARBINE
    4. SAFETY CABLE 2M (IMPORTANT)
    5. OAK WOODEN WALKMAN
    6. SWING ROPE
    7. TEXTILE BAG
    8. MATTRESS
    9. MATTRESS COVER

    MAINTENANCE

    The textile hammock can be washed at 40°C. The mattress cannot be washed due to the inserted buckwheat pods, you can only clean it with a damp cloth at the place of dirt contamination. Therefore, it is necessary to protect it with the cover that is included in the package. The service life of the product is at least 2 years.

    DISPOSAL

    Disposal of the product after irreparable damage or at the end of its service life - the device must be disassembled and separated into individual parts and materials, which will be disposed of in accordance with applicable legislation and regulations at the time of their disposal.

    Producer: MAD Solutions, s.r.o. website: www.homba.store